ARM Keil ULink2 Debug Unit Programmer for ARM and Cortex M

ARM Kail ULINK2 Debug Unit programmer

The ULINK2 debug unit connects your PC's USB port to your target system (via a JTAG, Cortex Debug, or OCDS connector). It allows you to program and debug your applications on target hardware.
ULINK2, together with MDK Version 5, provides excellent debug capabilities for Cortex-M devices. You can control the processor, set breakpoints, and read/write memory contents, all while the processor is running at full speed.


Broad Device Support:
ULINK2 connects to a wide variety of processor targets, including ARM7, ARM9, all Cortex-M, 8051, and C166 devices.
    JTAG support for ARM7, ARM9, 8051, C166, and all Cortex-M processors
    Serial Wire Debug (SWD) support for all Cortex-M processors
    Serial Wire Viewer (SWV) support for all Cortex-M processors

Run/Stop Debugging:
Using ULINK2, you can
    download programs to your target hardware
    examine memory and registers
    single-step through programs and insert multiple breakpoints
    run programs in real-time
    program Flash memory

Fast Connections:
ULINK2 offers fast and reliable target connections
    Data trace for Cortex-M up to 1 Mbit/s (UART mode)
    JTAG clock speed up to 10 MHz
    Supports Cortex-M devices running at up to 200 MHz
    Memory read/write up to 28 kBytes/s

Specification:
    Wide target voltage range: 2.7V - 5.5V
    USB 2.0 High-Speed connection
    USB powered (no power supply required)
    Target Connectors:
        10-pin (0.05") - Cortex Debug Connector
        20-pin (0.10") - ARM Standard JTAG Connector

For More Details on PC Click here

For More Details on Portables Click here.